Crimping reformer pigtails

Post Reply
allmandw
Posts: 1
Joined: Tue Oct 08, 2019 10:54 pm
Contact:

Crimping reformer pigtails

Post by allmandw » Wed Oct 09, 2019 7:01 pm

Has anyone done an online crimping of reformer catalyst tube pigtails recently? Was it done with reformer feed gas still in operation? Does anyone have a reference for a contractor that has state of the art equipment and recent experience to safely crimp off a reformer catalyst tube while in operation?

SKR101
Posts: 1
Joined: Fri Feb 21, 2020 7:12 am
Contact:

Re: Crimping reformer pigtails

Post by SKR101 » Fri Feb 21, 2020 7:27 am

Dear Friend,

Yes we had done it but not recently, few years back. The nipping was done by using in house resources.

KENVAN
Posts: 1
Joined: Thu Feb 27, 2020 4:41 pm
Contact:

Re: Crimping reformer pigtails

Post by KENVAN » Thu Feb 27, 2020 4:45 pm

We have done crimping of Reformer pigtails using an external contractor. Not sure if this is still of interest to you.

Post Reply