Secondary Reformer Water Jacketing

Post Reply
ADA
Posts: 3
Joined: Mon May 01, 2017 8:38 am
Contact:

Secondary Reformer Water Jacketing

Post by ADA » Sun Aug 04, 2019 8:18 am

Dear Friends.

Share your experiences with respect to benefits of Secondary Reformer water jacketting or painting in comparison with each other.

Regards

lambertbrite77
Posts: 5
Joined: Tue Mar 13, 2018 11:31 am
Contact:

Re: Secondary Reformer Water Jacketing

Post by lambertbrite77 » Sun Aug 11, 2019 7:52 am

For Kellogg`s plants, the secondary reformer is usually water jacketed as part of a robust design to the effectiveness of the equipment in the following ways:
1. The jacket water acts as a protective layer to the pressure shell in the event of the failure of the insulation hot-face and a possible run-a-way temperature by evacuating these temperatures and dumping same through continuous stream of flowing water.
2. The jacket water provides additional safety of the equipment by ensuring that the depleting hot-face insulation are monitored via monitoring and trending of the skin temperature thermographics of the jacketed water.

Regards.

Lambert Brite.

ADA
Posts: 3
Joined: Mon May 01, 2017 8:38 am
Contact:

Re: Secondary Reformer Water Jacketing

Post by ADA » Sun Aug 18, 2019 10:43 am

Dear lambert Brite,

Thanks for your detailed reply.

Regards
Adnan

Post Reply